Specification Sheet

E32D5 Full Size Digital / Electric
Convection Oven - 2 speed fan
on a Stainless Steel Stand
CONSTRUCTION
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel oven fan baffle and oven vent
Removable 5 position stainless steel side racks
Oven racks chrome plated wire (5 supplied)
Stainless steel frame side hinged door
0.2” / 5mm thick door outer glass
0.2” / 5mm thick low energy loss door inner glass
Full stainless steel welded door handle
Stainless steel control panel
Aluminized coated steel base and rear panels
CONTROLS
Electronic controls with Digital Time and Temperature display,
Manual or Program modes
Large ¾” / 20mm high LED displays
Two individual time and temperature setting control knobs
6 function keys
ON/OFF key
Fan LO speed key
Timer Start/Stop key
Moisture injection key (5 levels)
Programs select key
Actual temperature display key
Adjustable buzzer/alarm volume
Thermostat range 150-500°F / 50-260°C
Timer range from 180 minutes in countdown mode
Timer range up to 999 minutes in time count mode for
holding, slow cooking
Over-temperature safety cut-out
CLEANING
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass
(no tools required)
Removable plug-in oven door seal (no tools required)
3” / 76mm high stainless steel feet for easy access underside
SPECIFICATIONS
Electrical Requirements
208V, 60Hz, 1-phase, 5.8kW, 28A
220-240V, 60Hz, 1-phase, 6.5W, 27A
No cordset supplied
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 28
7
/8” / 735mm
Height 28¾” / 730mm including 3” / 76mm feet
Depth 31
7
/8” / 810mm
Oven Internal Dimensions
Width 18¼” / 465mm
Height 20¼” / 515mm
Depth 27½” / 700mm
Volume 6ft³ / 0.17m3
Oven Rack Dimensions
Width 18” / 460mm
Depth 26” / 660mm
Nett Weight (E32D5)
196lbs / 89kg
Packing Data (E32D5)
231lbs / 105kg
20.1ft³ / 0.57m3
Width 29
7
/8” / 760mm
Height 32” / 815mm
Depth 36
3
/8” / 925mm
SK32 Stainless Steel Stand
All stainless steel welded frame oven stand for Turbofan E32D,
E32T and G32D Series ovens
6 position tray runners standard
3” / 76mm diameter wheel swivel castors standard with 2 front
castors with dual swivel and wheel
Welded 1½” and 1¼” square tube front and rear frames
Welded rack supports/side frames
4 dia. 3” / 76mm swivel castors with 2 front castors dual wheel
and swivel lock
Top frame oven supports suit Turbofan E32D, E32T and G32D
Series oven mounting
Supplied CKD for assembly on site
External Dimensions (SK32 Oven Stand)
Width 28
7
/8” / 735mm
Height 34
5
/8” / 880mm
Depth 25
5
/8” / 650mm
Nett Weight (SK32 Oven Stand)
40lbs / 18.5kg
Packing Data (SK32 Oven Stand)
51lbs / 23kg
3.5ft³ / 0.1m3
Width 32
5
/8” / 830mm
Height 35½” / 900mm
Depth 6” / 152mm
INSTALLATION CLEARANCES
Rear 2” / 50mm
LH Side 2” / 50mm
RH Side* 3” / 75mm
* For fixed installations a minimum of 20” / 500mm is required
for service
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance sides
is required
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
www.moffatusa.com
www.turbofanoven.com
Designed and manufactured by
ISO9001
Quality
Management
Standard
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax [phone]
Email [e-mail]
www.moffatusa.com
Manufactured by:
Moffat Limited
45 Illinois Drive, Izone Business Hub
Rolleston 7675, New Zealand
© Copyright Moffat Ltd
US.TFN.S.1601
E32D5
E32D5 OVEN