Specification Sheet

www.moffatusa.com
www.turbofanoven.com
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax [phone]
Email [e-mail]
www.moffatusa.com
E28M4 Full Size Manual / Electric
Convection Oven on a Stainless
Steel Stand
CONSTRUCTION
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel oven fan baffle and oven vent
Removable 4 position chrome plated wire side racks
Oven racks chrome plated wire (4 supplied)
Stainless steel frame drop down hinged door
0.2” / 5mm thick door outer glass
0.2” / 5mm thick low energy loss door inner glass
Heavy-duty counterbalanced door hinges
Wear resistant powder coated welded door handle
Stainless steel control panel
Aluminized coated steel base and rear panels
CONTROLS
Power ON control panel indicator
Mechanical thermostat 150-500°F / 50-260°C
Heating ON control panel indicator
Manual 60 minute timer
Time-Up control panel indicator and buzzer
Over-temperature safety cut-out
CLEANING
Stainless steel top and sides continuous exterior panel
Porcelain enameled oven chamber
Fully removable chrome plated oven side racks
Removable stainless steel oven fan baffle
Full stainless steel oven fans
Easy clean door system with hinge out door inner glass (no
tools required)
Removable plug-in oven door seal (no tools required)
3” / 76mm high stainless steel feet for easy access underside
SPECIFICATIONS
Electrical Requirements
208V, 50/60Hz, 1-phase, 5.4kW, 25.8A
220-240V, 50/60Hz, 1-phase, 6.0kW, 25A
No cordset supplied
External Dimensions
Width 31
7
/8”/ 810mm
Height 26” / 662mm including 3” / 76mm feet
Depth 30” / 762mm
Oven Internal Dimensions
Width 27
3
/8” / 695mm
Height 14” / 355mm
Depth 18½” / 470mm
Volume 4.1ft³ / 0.116m3
Oven Rack Dimensions
Width 26” / 660mm
Depth 18” / 460mm
Nett Weight (E28M4)
153lbs / 69.5kg
Packing Data (E28M4)
191lbs / 86.5kg
19.4 ft³ / 0.55m3
Width 34¼” / 870mm
Height 29¾” / 755mm
Depth 32
7
/8” / 835mm
SK2731U Stainless Steel Stand
All stainless steel welded frame oven stand for Turbofan
E27, E28 and E31 Series model ovens
6 position tray runners standard
3” / 76mm diameter wheel swivel castors standard with 2
front castors with dual swivel and wheel
Welded 1 ½” and 1 ¼” square tube front and rear frames
Welded rack supports/side frames
4 dia. 3” / 76mm swivel castors with 2 front castors dual
wheel and swivel lock
Top frame oven supports suit Turbofan E27, E28 and E31
Series oven mounting
Supplied CKD for assembly on site
External Dimensions (SK2731U Oven Stand)
Width 31
7
/8” / 810mm
Height 34
5
/8” / 880mm
Depth 25
5
/8” / 650mm
Nett Weight (SK2731U Oven Stand)
43lbs / 19.5kg
Packing Data (SK2731U Oven Stand)
49lbs / 22kg
3.9ft³ / 0.11m3
Width 32
5
/8” / 830mm
Height 35 ½” / 900mm
Depth 6” / 152mm
INSTALLATION CLEARANCES
Rear 1” / 25mm
LH Side 1” / 25mm
RH Side 1” / 25mm
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance
sides is required
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
Designed and manufactured by
ISO9001
Quality
Management
Standard
Manufactured by:
Moffat Limited
45 Illinois Drive, Izone Business Hub
Rolleston 7675, New Zealand
© Copyright Moffat Ltd
US.TFN.S.1601
E28M4