Specification

Beleld™ Accessories Technical Specication
Double Robe Hook YB6403
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
YB6403CH – Double Robe Hook
Chrome Finish
YB6403BN – Double Robe Hook
Brushed Nickel Finish
YB6403ORB – Double Robe Hook
Oil Rubbed Bronze
1. Position the mounting plate on the wall at desired location. Large slots to
be top and bottom. Small holes to be right and left.
2. One at a time, place each anchor screw through the mounting post,
centered in the large slot hole. Using a Phillips screwdriver, turn the
anchor screw while applying pressure. Screw will self drill and tap into
drywall. Do not over tighten.
3. Place assembly over the mounting post, set screw facing down.
4. Tighten set screw.
To preserve the ne nish of this product, clean only with a soft damp cloth. Dry
well. Do not use commercial or abrasive cleaners.
Double Robe Hook is constructed of zinc.
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen Incorporated
Stock Number: _________________ Double Robe Hook
By Moen Incorporated
3.28"
(83mm)
3.25"
(82.55mm)
3.76"
(96mm)
3.14"
(80mm)
1.73"
(44mm)