Specification Sheet

Dartmoor
™
Technical Specication
YB2101
Tank Lever
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
☐ YB2101CH – Tank Lever
Chrome Finish
☐ YB2101BN – Tank Lever
Brushed Nickel Finish
☐ YB2101ORB – Tank Lever
Oil Rubbed Bronze Finish
☐ YB2101BL – Tank Lever
Matte Black Finish
Tank Lever is constructed of zinc. The arm
mechanism is constructed of plastic.
Stock Number: Tank Lever
By MOEN
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): [phone] • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen, Inc.
1. Remove existing tank lever.
2. Remove the arm mechanism from the new tank lever by loosening nut (A).
3. Unscrew the tank nut (B). The thread for the tank nut is a left handed thread.
4. Position the new tank lever through the tank hole. The tank lever handle should
be pointing away from the toilet bowl.
5. Tighten nut (B). Depending on the curvature of the tank, there might be a slight
gap between the outside of the tank and the base of the lever.
6. Place the arm mechanism on the tank lever post. Adjust the arm up or down as
needed. Tighten nut (A) to secure the arm in place.
7. Adjust the arm mechanism from side to side as needed. Make sure the arm
 doesnotcomeintocontactwiththetankwallortheushmechanism.
Tighten screw (A) to lock the arm in place
8. Attachtheappervalvechaintooneoftheprovidedslotsonthearm.Besure
to eliminate any slack in the chain.
9. Makesurenowaterisleakingthroughtheapperwhenthehandleisinits
 normalposition(notushing)
Topreservethenenishofthisproduct,cleanonlywithasoft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
2-15/16"
74mm
1-27/32"
47mm
1-15/32"
37mm