Specification Sheet
YB1018BN – 18” Towel Bar
Brushed Nickel Finish
YB1024BN –24” Towel Bar
Brushed Nickel Finish
YB1018CH – 18” Towel Bar
Chrome Finish
YB1024CH –24” Towel Bar
Chrome Finish
YB1018BRB – 18”Towel Bar
Mediterranean Bronze Finish
YB1024BRB –24” Towel Bar
Mediterranean Bronze Finish
25300 AL MO E N D R IVE NO RTH O L M STE D, OH 44070
CO R P O RATE HE A D Q U ART ER S : (800 ) 3 2 1 -88 0 9 FA X: (800) 8 48 - 6 6 36
IN T E RNAT IO NA L : (440 ) 962 - 2 0 00 FA X: ( 4 4 0 ) 962 -2726
CU ST O MER S ERV ICE (USA): 800 -882 - 0 1 16 FA X: (88 8 ) 379 -2720
WWW .MO EN .COM
Copyright Creative Specialties International Literature # BA1732
Towel bar post is a die cast from the
highest quality zinc alloy (Zamac).
Towel bar is stainless steel.
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 5/16” holes at each mounting post location that corresponds
to your product.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole in the
wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap
to activate anchor. Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening
each setscrew.
9. Place the mounting plate on the wall over the installed wall anchors
with “UP” facing you.
10. Insert screws through the mounting plate into the anchors. Tighten the
screws.
11. Assemble the towel bar and posts.
12. While assembled, position each end post with setscrews facing down
and place over both mounting posts. Tighten the setscrew at the
bottom of each post.
Stock Number:______________________ Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18” & 24” Towel Bar
YB1018 & YB1024
Traditional™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.