Specification Sheet

Flara
™
Accessories Technical Specication
Tilting Mirror YB0392
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
YB0392CH – Oval Tilting Mirror
Chrome Finish
YB0392BN – Oval Tilting Mirror
Brushed Nickel Finish
YB0392BG – Oval Tilting Mirror
Brushed Gold Finish
YB0392NL – Oval Tilting Mirror
Polished Nickel Finish
1. Position the mounting template on the wall in the desired location. Using a level,
align the template and tape it to the wall.
2. Using a ¼" diameter drill bit, drill 4 holes as indicated on the template.
3. Remove template from the wall.
4. Remove the screws and washers from each of the 4 wall anchors in the hardware
kit. Set the screws and washers aside for later use.
5. Insert the hollow wall anchors into the 4 holes in the wall by lightly tapping with a
hammer until ush.
6. Remove mounting posts from end post assembly by loosening each setscrew.
7. One at a time, place each mounting post over the wall anchors with notch facing
down. Insert the screws and washers through the slots in the mounting posts and
into the wall anchors.
8. To activate the wall anchors, turn screws until you feel increased resistance.
9. Loosen the 2 small screws on each of the end posts.
10. With the back of the mirror facing you, slide the end posts into position on the
mirror (See gure 1). Align the screws with the holes in the back plates. Tighten
all 4 screws.
11. Place mirror assembly over the mounting posts on the wall (setscrews facing
down). Tighten setscrews.
To preserve the ne nish of this product, clean only with a soft damp
cloth. Dry well. Do not use commercial or abrasive cleaners.
Oval Tilting Mirror posts are
constructed of zinc and mirror is
constructed of 5MM thick glass.
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
Copyright Moen Incorporated
Stock Number: __________________ Oval Tilting Mirror
By Moen Incorporated
37-3/4"
959mm
30-1/2"
775mm
3-3/16"
81mm
28"
711mm
37-3/4"
959mm
30-1/2"
775mm
3-3/16"
81mm
28"
711mm