Dimensions Guide

 Y3108BN – Pivoting Paper
Holder
Brushed Nickel Finish
 Y3108BRB – Pivoting Paper
Holder
Mediterranean Bronze Finish
 Y3108CH – Pivoting Paper
Holder
Chrome Finish
25300 AL MOEN D R IVE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: (800) 848 -6636
I NTER NATI ON AL: [phone]  FAX: [phone]
CUSTOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
WWW.MOEN . COM
Copyright Creative Specialties International Literature # BA1533
Pivoting Paper Holder post is die
cast from highest quality zinc alloy
(Zamac). Casting is plated in
Chrome, Brushed Nickel or
Mediterranean Bronze. Paper
Holder Bar is aluminum for Chrome
and Brushed Nickel finishes and
Stainless Steel for Mediterranean
Bronze.
Cleaning Instructions:
1. Position the mounting template on the w all in the desired location.
2. Using a level, align the template and tape it to the w all.
3. Drill tw o 5/16” holes at each mounting post location that corresponds to
your product.
4. Remove the template from the w all.
5. Fold ends of the plastic toggle together and insert into each hole in the
w all.
6. Lightly tap anchors until flush w ith the w all.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor. Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew .
9. Place the mounting plate on the w all over the installed w all anchors w ith
“UP” facing you.
10. Insert screw s through the mounting plate into the anchors. Tighten the
screw s.
11. Place each assembly over the mounting posts w ith setscrew s facing
dow n. Pivoting post w ith bar should be on the left side. Tighten both
setscrew s.
Stock Number:_______________Pivoting Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Pivoting Paper Holder
Y3108
Lindale™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.