Specification

MOEN®
Two-Handle Lavatory Faucet
Models: 84403, CA84403
84402, Discontinued
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 9/15
DESCRIPTION
• Chrome plated metal construction
• 1/2" IPS connections
• Includes metal/polypropylene pop-up type waste assembly for model
84403; less waste assembly for model 84402
OPERATION
• Lever handles
• Handles rotate toward spout to open
FLOW
• Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
LIFT
ROD
COLD
1/2" NPT
INLET
HOT
1/2" NPT
INLET
MOUNTING
NUT/WASHER
3/4"(19mm)
MAX. DECK
THICKNESS
4-5/8"
(118mm)
2-1/4"
(58mm)
3-13/16"
(98mm)
2-7/8"
(74mm)
NOTE: This faucet is designed to be
in stalled thru 3 holes, 1" min. dia.