Dimensions Guide

CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Spec i fi ca tions
Rev. 3/11
7-1/4”
(1841mm)
5-3/8”
(137mm)
3”
(76mm)
3-5/16”
(84mm)
8” (203mm) - 16” (406mm)
centers
Spout Escutcheon Dia.
2-7/16” (62mm)
Handle Escutcheon Dia.
2” (51mm)
4-1/8”
(105mm)
1-1/4” (32mm)
Max Deck Thickness
Lift
Rod
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Optional hot and cold temperature indicators available
• For use with 9000 valve
• Designed to be installed through 3, 1-1/8” dia. holes
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side handle counterclockwise to open and clockwise to close
• Rotate cold side handle clockwise to open and counterclockwise to close
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min) max. at 60 psi
CARTRIDGE
• 1224 cartridge design with nonmetallic/nonferrous
and stainless steel materials
STANDARDS
• Third party certified to CSA B125.1, ASME A112.18.1, and all applicable
requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• Third party certified to meet EPA criteria for water efficiency and
performance
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
FINA™
Two-Handle Widespread Lavatory
Faucet Trim
Models: TS41708 Series
Valve: 9000
NOTE: FOR DECK THICKNESS 1-3/8” - 3”, USE SERVICE KIT #115001. VALVES INSTALL THROUGH 1-1/4” DIA. HOLE
M•pact™ System