Specification Sheet

ManualsBrandsMoen ManualsBathWaterhill Brushed Nickel 2-Handle Widespread WaterSense Bathroom Sink Faucet

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia. holes

8" on center

• 1/2" copper connections

• Adaptable for non-8" centers

OPERATION

• Maximum handle rotation angle is 90˚ to full on for either handle

• Rotate hot side counterclockwise to open and clockwise to close

• Rotate cold side clockwise to open and counterclockwise to close

FLOW

• Water usage is limited to these maximum flow rates as indicated by the

corresponding product markings

° 1.2 gpm max (4.5L/min) at 60 psi

CARTRIDGE

• 1224 cartridge design nonmetallic/nonferrous and stainless steel material

STANDARDS

• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all

applicable requirements referenced therein

• Certified to NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water

efficiency regulations

• Complies with California Proposition 65 and with the Federal Safe Drinking

Water Act

•

ADA for handles

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to

the original consumer purchaser

• 5 year warranty if used in commercial installations

WATERHILL™

Two-Handle Wall Mount Faucet

Model: TS416 series

Valve: 9400

2-15/16"

(75mm)

MAX WALL THICKNESS

1-3/4” (45mm)

3” (76mm) MIN.

8" (203mm) MIN.

2-3/8" DIA.

(60mm)

Spout

Escutcheon

(229mm)

3-7/8"

(98mm)

2-13/16" DIA.

(71mm)

Handle

Escutcheon

8.16"

(207mm)

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Rev. 1/16