Installation Manual
You can select a language from three options: English, French and Spanish. In
addition, you can also select your time zone to display on the controller and set the
displayed temperature to Celsius or Fahrenheit.
o During the initial install, a language was selected for the controller display.
However, within the mobile app, the language can be modified by going to the
“Settings” tab.
o The next available option is to choose the proper time zone, which is needed to
accurately display the date and time on the controller. Without a time zone
selection, the controller will not display a date or time.
o Finally, select the unit of measure for temperature.
Selecting Ambient Mode:
The U by Moen shower is in Ambient Mode when not being used. The factory default is that the
screen will always be on.
You can select the screen's appearance by clicking on the “Ambient Mode” row. This
will lead to a screen where you can opt to “Turn off display when idle” by sliding the ball
from left to right to increase brightness or from right to left to decrease brightness.
To pair the app with a second device, repeat the “Add a Device” process giving the
additional controller a different name.
Selecting Outlet Icons:
Within the “Settings” tab, you can modify which icons appear on the controller as well as the
mobile app to best represent each of your shower fixtures such as showerheads, hand showers,
body sprays and more. Simply drag and drop the icons to best represent the outlet functions in
your shower.
Water Savings Mode Notification:
There are two different screen settings depending on whether or not Water Savings Mode was
enabled on the in-shower controller at the time of installation.
Enabled—if the setting is enabled, you can view an explanation and FAQs related to this
setting.
Not enabled—if the setting is not enabled, you can view an explanation and FAQs
related to this setting.
Using the Controller
Starting Your Shower with the Power Button
Turning the shower on and off is controlled by the power button. You can also turn on the
shower using the controller by simply pushing preset 1 or 2.