Installation Manual

Syncing the Mobile App to the Controller
Once an account has been created, the controller can be linked to the user's account and
app.
 To sync a controller to the app, first open the app. If a controller hasn't been synced,
the opening screen will ask you to add a device by clicking "Add Device."
 Once you have clicked the “Add Device” button, you will be directed through a
number of steps to sync your controller to the app. The first step is to connect your
mobile device to the temporary WiFi network for the controller.
 Once the mobile app is connected to the controller WiFi, you will input the name of
the shower (e.g. Master Shower, Kids' Bathroom, Guest Bathroom, etc.), select your
home WiFi network, enter your network password and sync the controller to the app
using a security code.
o To obtain the security code from the controller to securely sync to the app, first
press and hold the hot temperature arrow key on the controller for five seconds.
The screen will then change to a bright red screen and display a unique PIN.
o Next, enter this PIN into the mobile app. Once all fields are filled in properly, the
“Next” button will be enabled. You can then select the button to start the syncing
process.
o Finally, you will see a pop-up box showing that the app and controller are
syncing. Once the syncing is complete, you will see a pop-up window stating that
the shower is set up.
o To add additional devices, simply go back to the home screen, click the “Add
Device” button and follow the same steps outlined above.
Programming Settings from the App
Using the app, the “Settings” tab allows users to update certain system-wide settings unrelated to
other personalized presets.
Creating a Title for the Shower Controller:
Shower controllers can be named after locations in the house for easy identification (e.g. Master
Bathroom, Kids' Bathroom, Main Shower, etc.)
 To name a shower controller, click on the "Controller" row and a keyboard will appear
at the bottom of the screen allowing you to name the controller.
 To pair the app with a second device, repeat the “Add a Device” process giving the
additional controller a different name.
Selecting a WiFi Network for the Controller:
Clicking on the current WiFi network will permit the selection of a different network if needed.
Selecting Language and Unit Settings: