Specification

17-05-2021
BANBURY
®
Two-Handle 4’’ Centerset Lavatory Faucet
MODELS:
84943 Series
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2’’ IPS connections for flexible hoses only; not for use with rigid or
semi-rigid supply risers (3/8’’ Copper or Pex) with coupling nuts
• Installation through 3 holes, 1’’min.diameter, and 4’’ on center
• Includes non-metal push-down waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90° to full on
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
• Rotating spout
FLOW
• Water usage is limited to these maximum flow rates
as indicated by corresponding product markings
。 。1.2 gpm max (4.5 L/min) at 60 psi
CARTRIDGE
• 1224 cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified at WaterSense
®
, ASME A112.18.1/
CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with
California water efficiency regulations
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original homeowner
• 10 years warranty when used in a multifamily installation
• 5 years warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
OPTIONS (See Illustrated Parts page)
• Thin and thick deck mounting hardware kits available
5/16”(8mm)MIN. Deck Thickness
1-3/16’’(30mm) Max. Deck Thickness
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
3-5/8”
92mm
9-1/4”
235mm
4”
102mm
Escut.
6-1/2”
165mm
Deck Gasket
6-5/8”
168mm
4-1/8”
105mm
2-1/2” 64mm
Min. to backsplash
recommended for lift
rod operation
7”
178mm
5-5/8”
143mm
Escut.
2-1/2”
64mm
Deck
Gasket
2-1/2”
64mm