Specification

13-05-2021
9-1/4”
235mm
3-5/8”
92mm
2-9/16”
65mm
3-3/4”
95mm
5/16”(8mm)MIN. Deck Thickness
1-3/16’’(30mm) Max. Deck Thickness
5-5/8”
143mm
2-1/2”
64mm
2-3/8”
60mm
4”
102mm
6-1/2”
165mm
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2’’ IPS connections for flexible hoses only; not for use with rigid or
semi-rigid supply risers(3/8’’ Copper or Pex) with coupling nuts
• Installation through 3 holes, 1’’min.diameter, and 4’’ on center
• Includes non-metal push-down waste assembly
OPERATION
• Lever handles
• Maximum handle rotation angle is 90° to full on
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
FLOW
• Water usage is limited to the maximum flow rates as
indicated by corresponding product markings
。 。1.2 gpm max (4.5 L/min) at 60 psi
CARTRIDGE
• 1224 cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified at WaterSense
®
, ASME A112.
18.1/CSA B125.1, and all applicable requirements
referenced therein including NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with
California water efficiency regulations
• Complies with California Proposition 65 and with
the Federal Safe Drinking Water Act
• for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original homeowner
• 10 years limited warranty when used in a multifamily installation
• 5 years limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
OPTIONS (See Illustrated Parts page)
• Thin and thick deck mounting hardware kits available
Banbury
Two-Handle 4’’ Centerset Lacatory Faucet
Banbury
®
Two-Handle 4’’ Centerset Lavatory Faucet
MODELS: 84942 series
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications