Specification Sheet
Model: T8342NH
T8342NHCBN
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
36"
(912mm)
12"
(305mm)
FLOOR LINE
ESCUTCHEON
HANDLE
DIRECTION
OF HANDLE
ROTATION
6-3/4"
(171mm)
L
C
3" (76mm)
MIN. WALL
CAVITY
6'-6"
(1981mm)
NOMINAL
7" (178mm)
ESC. DIAM.
4-1/2” (114mm)
PLASTER GUARD
OPENING
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FINISHED WALL LINE
3/16" (21mm) - 2" (51mm)
with optional adapter
H
C
F
O
3-7/16"
(87mm)
2-3/4"
(69mm) Min.
3"
(76mm)
Min.
Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc.
Diameter
28-1/2"
NOMIMAL
(723mm)
FLOOR LINE
6'-6" (1981mm)
NOMINAL
DROP ELL
TUB RIM
FINISHED
WALL LINE
1/2-14 NPT
1/2-14
NPSL
THREAD
2" Dia.
3-3/16"SPRAY
HEAD
DIAMETER
9"SPRAY WAND
HEIGHT
DESCRIPTION
• Metal and brass construction with Chrome plated finish, also in Classic Brushed Nickel (CBN) finish
• Pressure balancing cycle valve design
• 3 function transfer valve
• Contains: hand-held shower with non-positive shut off button,
69" metal hose, 30" slide bar, and drop ell
Slide bar is NOT DESIGNED TO BE A GRAB BAR
• Applicable components are supplied with vandal resistant screws
OPERATION
• Temperature and transfer valves both have ADA compliant lever style handles
• Temperature handle operates counterclockwise through a 270° arc with off at 6 o’clock, and the
maximum hot at the 9 o’clock position
• Adjustable temperature limit stop
• Pressure balancing mechanism maintains selected discharge temperature to ± 3.6°
• Transfer valve operates 3 distinct functions
• Easy to operate non-positive shut off button (reduces the flow of water to a trickle)
FLOW
• 2.5 gpm (9.5 L/min) hand-held shower
• Pair with a Vandal-Resistant Showerhead:
5263 (2.5 gpm/9.5 L/min) - Chrome finish
5263CBN (2.5 gpm/9.5 L/min) - Classic Brushed Nickel finish
5263EP17 (1.75 gpm/6.6 L/min) - Chrome finish; WaterSense® certified
5263EP17CBN (1.75 gpm/6.6 L/min) - Classic Brushed Nickel finish; WaterSense® certified
5263EP15 (1.5 gpm/5.7 L/min) - Chrome finish; WaterSense® certified
5263EP15CBN (1.5 gpm/5.7 L/min) - Classic Brushed Nickel finish; WaterSense® certified
CARTRIDGE
• Pair with a brass Posi-Temp rough-in valve:
• 8370HD*: 1/2" CC connection without integral stops
• 8371HD*: 1/2" CC connection with integral stops
• 8372HD*: 1/2" IPS connection with integral stops
• 8373HD*: 1/2" PEX connection with integral stops
• 8374HD*: 1/2" CPVC connection with integral stops
• 8375HD*: 1/2" UPONOR connection with integral stops
*Includes the 1222HD Brass Posi-Temp Cartridge
• Nonmetallic/nonferrous and stainless steel materials
• Also requires the 3360 3 function transfer rough-in valve
• Accommodates back to back installations
STANDARDS
• Third party certified to: WaterSense® (only applies to 1.75 and 1.5 gpm), ASME A112.18.1/CSA B-
125.1 and all applicable requirements referenced therein including NSF61/9
• Backflow prevention compliance through ASME A112.18.3
•
ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
Single-Handle Posi-Temp®
Shower System Trim Only
Less Showerhead
(With 3 Function Transfer Valve)
Rev. 8/14
NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.
*Refer to (ADAAG) guidelines or local codes for proper ADA installation.
C O M M E R C I A L