Specification
FAUCET DESCRIPTION
• Duralock™ quick connect system
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Includes hot and cold temperature indicators
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1234™ Duralast™ cartridge
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
RIZON™
Two Handle Widespread
Lavatory Faucet Trim
Model: T6920 Series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE
KIT #175709. VALVES INSTALL THROUGH 1-1/4"
DIA. HOLE.
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/16
14"
(355mm)
3"
(76mm)
2-11/16"
(68mm)
8"
(203mm)
4-5/8"
(117mm)
3-1/2"
(89mm)
4-21/64"
(110mm)
5-5/16"
(135mm)
LIFT ROD
16°
1-1/2"
(38mm)
2-3/32"
(53mm)
2"
(51mm)
4"
(102mm)
2-1/4”
(57mm)
max deck thickness
There is more than 1 version of this model.
Page down to identify the version you have.