Specification Sheet

DESCRIPTION
• Metal construction with chrome plated or
wrought iron finishes or LifeShine
®
polished brass,
brushed nickel finishes
• Installed on 6" (152mm) to 16" (406mm) centers
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
• Diverter valve includes an integral vacuum breaker
• Includes metal pop-up type waste assembly
• Includes hot and cold indicators
OPERATION
• Lever style handles, 180˚ rotation
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Water flow is diverted by turning the knob counter
clockwise for fill and clockwise for rosetta spray
CARTRIDGE
• 94831 diverter cartridge
• 1224 cartridge design for hot and cold valves
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified by CSA to meet CSA B-125,
ASME A112.18.1M and all requirements
referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
CRITICAL DIMENSIONS
(DO NOT SCALE)
KINGSLEY™
Two Handle Bidet with Metal Waste Assembly
Models: T5210, T5210CP, T5210BN,
T5210P, T5210WR
NOTE: See reverse side
for illustrated parts and handle insert options
NOTE:
Minimum Diameter Holes for Installation
Diverter Valve - 1” (25mm)
Handle Valves - 1-1/8” (29mm)
Spray Nozzle - 5/8” (16mm)
Lift Rod Escutcheon - 1/2” (13mm)
1-1/4" (32mm) MAX.
DECK THICKNESS
3" (76mm) MIN.
6" (152mm) MIN.
16" (406mm) MAX.
2-7/8"
(73mm)
5-1/8"
(130mm)
2-1/2"
(64mm)
CRITICAL
LEVEL
DIVERTING
MECHANISM
2-7/8"
(73mm)
HANDLE BASE
2-7/16" (62mm)
DIAMETER
2"
(51mm)
COLD
INLET
HOT
INLET
FLEXIBLE
CONNECTORS
LIFT ROD
SPRAY
NOZZLE
7/8"
(22mm)
MAX.
3/8" DIA.
SUPPLY
TUBE
2-1/8"
(53mm)