Dimensions Guide

ManualsBrandsMoen ManualsShower FaucetsT2112BN

Specifications

MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158

CRITICAL DIMENSIONS

(DO NOT SCALE)

DESCRIPTION

• Metal construction with chrome plated or

wrought iron finishes or LifeShine

polished brass,

brushed nickel finishes

• Includes adjustable showerhead, arm and flange

OPERATION

• Handle operates counterclockwise through a 270°

arc with off at 6 o’clock and maximum hot at the 9

o’clock position. Shut off in clockwise direction

• Adjustable temperature limit stop to control

maximum hot water temperature

• Pressure balancing mechanism maintains selected

discharge temperature to ± 2°

FLOW

• Showerhead is limited to 2.5 gpm (9.5 L/min)

CARTRIDGE

• 1222 cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certified by CSA to meet CSA B-125,

ASME A112.18.1M and all applicable requirements

referenced therein and complies with the applicable

requirements of ANSI A117.1

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

ADA symbol applies to shower

valve control only.

ADA

THIN W

ALL APPLICATION

THICK WALL APPLICATION

7" (178mm)

ESCUTCHEON

DIAMETER

2" CC (51mm)

1 7/8" IPS (48mm)

MAX WALL

HOT

INLET

COLD

INLET

FINISHED WALL LINE

FACE OF STUD

4-1/2" (114mm)

WALL OPENING

FLOOR

45" (1143mm)/

48" (1219mm)-SHOWER

7-1/2"

(191mm)

MIN.

6'-6"

(1981mm)

1 3/8" (35mm)

2 1/2" MAX. (63mm)

1/2" MIN. CC (13mm)

5/8" MIN. IPS (16mm)

FLOOR LINE

1 3/8"

(35mm)

1 1/2"

(38mm)

3/16" (typ) (5mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

DIAMETER

WALL

OPENING

PLASTIC

TUB/SHOWER

SURROUND

KINGSLEY™ POSI-TEMP

Single-Handle Tub/Shower (Trim Only)

Models: T2112, T2112CP,

T2112BN, T2112P, T2112WR

NOTE: See reverse side for illustrated

parts and optional handle inserts