Spec Sheet

WEYMOUTH™
Single Handle Single Hole Mount
High Arc Kitchen Faucet
Models: S72101 series with spray
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH
1 OR 2 HOLES: A 11/2” 38MM MIN. DIA. HOLE FOR VALVE
AND A 11/4” 32MM MIN. DIA. HOLE FOR SIDE SPRAY.
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes matching side spray with Duralock quick connect system
• Single hole mounting
• Flexible supply lines with 3/8" compression fittings
• 360˚ rotating spout
OPERATION
• Single handle lever
• Temperature controlled by 100˚ arc of handle travel
• Faucet may be installed with or without side spray
FLOW
• Spout flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and
all applicable requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CRITICAL DIMENSIONS
DO NOT SCALE
Rev. 2/18
3-1/2"
(89mm)
5-3/4"
(146mm)
2-3/16"
(56mm)
2-1/2" (63mm)
MAX DECK
THICKNESS
7-1/2"
(191mm)
8-1/4"
(210mm)
10-1/2"
(267mm)
2"
(51mm)
5-3/4"
(146mm)
31-1/2"
(800mm)
2-5/16"
(58mm)
1-1/4" (32mm)
THRU HOLE
1-1/2" (38mm)
THRU HOLE
4-3/4"
(121mm)
3-1/2"
3/4"