Specification Sheet
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
90 DEGREE™
Single-Handle Lavatory Faucet
Model: S6705 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 1 HOLE, 1-1/8” MIN. DIA.
Lift
Rod
2-1/2"
(80mm)
MAX.
6-5/16”
(160mm)
4-3/16”
(106mm)
3-13/16”
(97mm)
7-5/16”
(186mm)
2-3/16”
(56mm)
1-11/16”
(43mm)
23-1/4”
(593mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8” compression fittings
• Includes metal pop-up waste assembly
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and
all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 2/16