Spec Sheet

Specifications
DESCRIPTION
• Metal construction with various nishes identied by sux
• Flexible supply lines with 3/8" compression ttings
• Includes metal pop-up waste assembly
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Flow is limited to 1.0 gpm max (3.8L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certied to WaterSense®, ASME A112.18.1/CSA B125.1, NSF 61/9
& 372 and all applicable requirements referenced therein
• Products marked with 1.0 gpm are compliant with California water
eciency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
90 DEGREE™
Single-Handle Lavatory Faucet
Model: S6701 series
NOTE: THIS FAUCET IS DESIGNED
TO BE IN STALLED THROUGH 1
HOLE, 1-1/8" MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Lift
Rod
2-1/2"
(80mm)
MAX.
6-5/16"
(160mm)
4-1/4"
(108mm)
3-13/16"
(97mm)
7-5/16”
(186mm)
2-3/16"
(56mm)
1-11/16"
(43mm)
23-1/4"
(593mm)
Recommended
Wall Clearance
2-1/2"
(63mm)
Rev. 6/19
There is more than one version of this model.
Page down to identify the version you have.