Dimensions Guide

ManualsBrandsMOEN ManualsBath90 Degree Single Hole 1-Handle Bathroom Faucet in Brushed Nickel

CRITICAL DIMENSIONS

(DO NOT SCALE)

Specifications

FOR MORE INFORMATION CALL: 1-800-465-6130

www.moen.com

90 DEGREE™

Single-Handle Lavatory Faucet

Model: S6700

NOTE: THIS FAUCET IS DESIGNED TO BE

IN STALLED THRU 1 HOLE, 1-1/8” MIN. DIA.

Lift

Rod

2-1/2"

(80mm)

MAX.

6-5/16”

(160mm)

4-1/4”

(108mm)

3-13/16”

(97mm)

7-5/16”

(186mm)

2-3/16”

(56mm)

1-11/16”

(43mm)

23-1/4”

(593mm)

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supply lines with 3/8" compression fittings

• Includes metal pop-up waste assembly

OPERATION

• Lever style handle

• Temperature controlled by 100° arc of handle travel

FLOW

• Flow is limited to 1.2 gpm max (4.6L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1

and all applicable requirements referenced therein

• Certified to NSF 61/9 & 372

• Products marked with 1.2 gpm are compliant with California water

efficiency regulations

• Complies with California Proposition 65 and with the Federal Safe

Drinking

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Rev. 1/16

There is more than 1 version of this model.

Page down to identify the version you have.

Summary of content (2 pages)

PAGE 1
Speci fic at ions There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • Metal construction with various finishes identified by suffix • Flexible supply lines with 3/8" compression fittings • Includes metal pop-up waste assembly OPERATION • Lever style handle • Temperature controlled by 100° arc of handle travel FLOW • Flow is limited to 1.2 gpm max (4.
PAGE 2
Speci fic at ions DESCRIPTION • Metal construction with various finishes identified by suffix • Flexible supply lines with 3/8" compression fittings • Includes metal pop-up waste assembly OPERATION • Lever style handle • Temperature controlled by 100° arc of handle travel FLOW • Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi CARTRIDGE • 1255™ Duralast™ cartridge for Single-Handle Faucets STANDARDS • Third party certified to WaterSense®ASME A112.18.1/CSA B125.