Dimensions Guide

ManualsBrandsMoen ManualsBathIcon Chrome 2-Handle 4-in Centerset WaterSense Bathroom Sink Faucet (Drain Included)

CRITICAL DIMENSIONS

(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

ICON™

4" Lavatory Faucet

with Metal Waste Assembly

Models: S6510 series

NOTE: THIS FAUCET IS DESIGNED TO BE

INSTALLED THRU 3 HOLES, 1" MIN. DIA.

8-1/2

(216mm)

4-1/2”

(114mm)

Lift

Rod

3“

(76mm)

4“

(102mm)

5-1/4”

(134mm)

3/4”

(19mm)

Max. Deck

Thickness

5-3/8

(136mm)

Cold

1/2" NPT

Hot

1/2" NPT

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

• Includes metal pop-up waste assembly

OPERATION

• Lever style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counterclockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counterclockwise to close)

FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to

2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 cartridge design

• Nonmetallic and stainless steel material

STANDARDS

• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,

and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with

the Federal Safe Drinking Water Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

2/11

Summary of content (1 pages)

PAGE 1
Specifications DESCRIPTION • Metal construction with various finishes identified by suffix • 1/2" IPS connections • Includes metal pop-up waste assembly OPERATION • Lever style handles • Maximum handle(s) rotation angle is 90˚ to full on • Rotate hot side counterclockwise to open (clockwise to close) • Rotate cold side clockwise to open (counterclockwise to close) FLOW • Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max (8.