Specification Sheet
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8” compression fittings
• Includes metal pop-up waste assembly
• Includes optional 3 hole deck plate (escutcheon)
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
25"
(635mm)
Max Thickness
2-1/2” (63mm)
w/vessel extension
Open
Position
14-1/2”
(367mm)
Closed
Position
13-1/2”
(343mm)
Vessel
Extension
2 x 2-1/2”
(63mm)
1 Hole (optional)
Escutcheon 2-1/2”
(63mm) Dia.
3 Hole (optional)
Escutcheon 6-1/2” (165mm)
Max Thickness 3” (76mm)
8-1/2”
(215mm)
4”
(101mm)
Open
Position
9-1/2”
(241mm)
5”
(127mm)
9”
(228mm)
Icon™
Single-Handle Lavatory Faucet
Models: S6500 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 1 HOLE, 1-1/8" MIN. DIA.
*Use A1717 Extension Kit for Vessel Sink Applications
Rev. 1/16
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
There is more than 1 version of this model.
Page down to identify the version you have.