Specification

ASCENT™
Single Handle High Arc
Pullout Bar/Prep Faucet
Model: S61708 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/2" (38mm) MIN. DIA.
13-7/32"
(336mm)
7-15/32"
(190mm)
7-1/2"
(191mm)
2-1/2" max deck
thickness
4-7/32”
(107mm)
6-7/16”
(164mm)
2-5/8"
(67mm)
22”
(558mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" fittings connect directly to supply stop
• 360˚ rotating spout
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• Spray function requires continuous button pressure
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
• The backflow protection system in the device consists of two
independently operating check valves, a primary and a secondary
which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installation
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 8/13