Specification

ASCENT™
Single Handle High Arc
Pullout Bar/Prep Faucet
Model: S61708 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/2" (38mm) MIN. DIA.
13-7/32"
(336mm)
7-15/32"
(190mm)
7-1/2"
(191mm)
2-1/2" max deck
thickness
4-7/32”
(107mm)
6”
(152mm)
2-5/8"
(67mm)
29-1/2”
(750mm)
DESCRIPTION
• Reflex™ pulldown system offers smooth operation, easy movement and
secure docking
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" compression fittings
• 360˚ rotating spout
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• Spray function requires continuous button pressure
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and
all applicable requirements referenced therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
• The backflow protection system in the device consists of two
independently operating check valves, a primary and a secondary
which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installation
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 8/13
There is more than 1 version of this model.
Page down to identify the version you have.