Specification

ManualsBrandsMOEN ManualsKitchen ApplianceWaterhill Single-Handle Bar Faucet in Classic Stainless

Rev. 12/11

Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.

2-1/2" (64mm)

MA X. DECK THICKNESS

12-7/32"

(310mm)

4-1/8"

(105mm)

CL OSED

5-7/16 (138mm)

FULL OPEN

QUICK C ONNEC T

HOSE ASSEMBL Y

8-21/32"

(220mm)

3-7/16"

(87mm)

6-3/32"

(155mm)

32-1/2”

(826mm)

HANDLE ESCUTCHEON DIA.

2-13/32 (61mm)

DESCRIPTION

• Metal construction with various finishes identified by suffix

• Flexible supplies with 3/8" compression fittings

• Designed to be installed through 2, 1-1/4” (32mm) min. dia. holes

• Hydrolock® quick connect installation

OPERATION

• Lever style handle

• Temperature controlled by 100° arc of handle travel

FLOW

• Spout flow is limited to 2.0 gpm (7.6 L/min) at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein including NSF 61/9

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe

Water Drinking Act

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to

the original consumer purchaser

• 5 year warranty if used in commercial installations

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

S p e c i f i c a t i o n s

There is more than 1 version of this model.

Page down to identify the version you have.

WATERHILL™

Single-Handle Bar Faucet

Models: S611series

NOTE: DESIGNED TO INSTALL THROUGH 2 HOLES

1-1/4” (32MM) MIN. DIA. AND 4” (102MM) ON CENTER

The use of aerator part 116711

reduces flow to a maximum of

1.5 gpm (5.7L/min.)

CRITICAL DIMENSIONS

(DO NOT SCALE)

Summary of content (2 pages)

PAGE 1
S p e c i f i c a t i o n s There is more than 1 version of this model. Page down to identify the version you have. DESCRIPTION • • • • Metal construction with various finishes identified by suffix Flexible supplies with 3/8" compression fittings Designed to be installed through 2, 1-1/4” (32mm) min. dia. holes Hydrolock® quick connect installation OPERATION • • Lever style handle Temperature controlled by 100° arc of handle travel FLOW • Spout flow is limited to 2.0 gpm (7.
PAGE 2
S p e c i f i c a t i o n s DESCRIPTION • • • • • Metal construction with various finishes identified by suffix 1/2” IPS connections will accept standard ball nose connection for 3/8” tubing Includes hot and cold temperature indicator Designed to be installed through 2, 1-1/4” (32mm) min. dia. holes Hydrolock® quick connect installation OPERATION • • Lever style handle Temperature controlled by 130° arc of handle travel FLOW • Aerator is limited to 2.0 gpm (7.