Technical Specifications

2-1/2” Max Deck
Thickness
(64mm)
2-1/2”
(64mm)
(91°)
11”
(280mm)
10”
(254mm)
22-3/4”
(579mm)
7-1/4”
(184mm)
2-1/2”
(63mm)
2-1/2”
(63mm)
6-5/16”
(160mm)
4”
(101mm)
5-5/8”
(142mm)
90 DEGREE™
Single Handle High Arc
Bar/Prep Faucet
Model: S5170 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 1 HOLE, 1-1/4” (32mm) MIN. DIA.
Specifications
TO ORDER PARTS CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Single hole mounting
• Flexible supply lines with 3/8" compression fittings
• High arc spout provides height and reach to fill or clean large pots
• 360˚ rotating spout provides ability to install handle on either side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
FLOW
• Flow is limited to 2.2. gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe Water
Drinking Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
4/11