Specification Sheet

5-1/4”
(133mm)
32”
(813mm)
6-1/8”
(156mm)
5-1/2”
(140mm)
2-1/2”
(64mm)
2-1/2"
(64mm)
MAX.
7-13/16”
(198mm)
5.550826”
(141mm)
BACK SPLASH
RECOMMENDED
WALL
CLEARANCE
2-1/2”
(63mm)
2”
(51mm)
WEYMOUTH
™
Single-Handle Lavatory Faucet
Model: S42107 series
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 1 HOLE, 1-1/8" MIN. DIA.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes metal pop-up type waste assembly
• Flexible supplies with 3/8" compression fittings connect directly to
supply stops
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 1/16
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
There is more than 1 version of this model.
Page down to identify the version you have.