Specification

4-1/2"
(114mm)
2-1/4"
(57mm)
2"
(51mm)
6"
(152mm)
3-3/4" (95mm)
MAX. DECK THICKNESS
4-1/4"
(107.5mm)
3"
(76mm)
8-11/16"
(220mm)
28-3/4"
(730mm)
2-1/2" (63.5mm)
RECOMMENDED
WALL
CLEARANCE
3-1/16"
(78mm)
4.21"
(107mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes metal pop-up type waste assembly
• Flexible supply lines with 3/8" fittings connect directly to supply stops
OPERATION
• Pivot action lever style handle
FLOW
• Flow is limited to 1.5 gpm max. (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1, NSF 61/9, ICC A117.1
and all applicable requirements referenced therein
• Third party certified to comply with WaterSense® High Efficiency
Bathroom Sink Faucet Specification
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
Fina™
Single-Handle Lavatory Faucet
Models: S41707 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THROUGH 1 HOLE 1-1/4” (32MM) MIN. DIA.
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 3/11