Use and Care Guide

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.SHOWHOUSE.MOEN.COM
Copyright Creative Specialties International
Peened grab bar
rods
are formed
from 18–gauge (.049) type 304
stainless steel tubing with a satin
finish.
q
R8912P
–
12” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8918P – 18” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8924P – 24” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8930P – 30” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8936P – 36” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
q R8942P – 42” Grab Bar
Stainless Steel Peened Finish
Concealed Screw Mounting
1 ½” Diameter Bar
1. All screws must mount firmly into a wood stud.
2. Place the grab bar on the wall in the desired location. Use a level, if
desired, to verify placement.
3. With a pencil, lightly mark the (6) mounting hole locations.
4. Mounting unit on wall using the #10 2” screws (provided).
5. Snap flange covers into place.
Stock Number:
______________________Grab Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ½” Peened Grab Bar – Concealed Screw
R8900
Home Care Technical Specification
Compliance:
- ADA Compliant
- Tested to 300 lbs. pull
Dim. A
Dim. B
Dim. C
R8912P 12.00 8.86 15.14
R8918P 18.00 14.86 21.14
R8924P 24.00 20.86 27.14
R8930P 30.00 26.86 33.14
R8936P 36.00 32.86 39.14
R8942P 42.00 38.86 45.14