Specification Sheet

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1676
1 ½” grab bar rods are formed from
type 304 stainless steel tubing.
12” – 42” length is 20 gauge
48” length is 18 gauge
 8912, R8912W – 12” Grab Bar
Satin Finish
1 ½” Bar, Concealed Screw Mounting
 R8916, R8916W – 16” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
 R8918, R8918W, LR8918W – 18” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
 R8924, R8924W, LR8924W – 24” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
 R8930, R8930W – 30” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
 R8932, R8932W – 32” Grab Bar
Satin Finish, White Finish
1 ½” Bar, Concealed Screw Mounting
 R8936, R8936W – 36” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
 8942, R8942W – 42” Grab Bar
Satin or White Finish
1 ½” Bar, Concealed Screw Mounting
 DN8948, R8948W – 48” Grab Bar
Satin Finish, White Finish
1 ½” Bar, Concealed Screw Mounting
1. Position unit on wall in desired location.
2. Mark mounting holes.
3. Drill starter holes.
4. Mount unit on wall using 2” screws (provided).
5. Snap flange covers into place.
Note: SecureMount Anchors are recommended for use in non-
stud (hollow-wall) applications per installation instructions.
Stock Number:____________________1 ½” Grab Bars
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
1 ½” Grab Bars – Concealed Screw
8900
Home Care Technical Specification
Compliance:
- ADA, ANSI, ASTM, CSA
- Tested to 500 lbs. pull
A
B
C
8912
12"
8.175
15.25
8916
16"
12.175
19.25
8918
18"
14.175
21.25
8924
24"
20.175
27.25
8930
30"
26.175
33.25
8932
32"
28.175
35.25
8936
36"
32.175
39.25
8942
42"
38.175
45.25
8948
48"
44.175
51.25