Technical Specifications

Towel Ring

is stamped from

ype

304 stainless steel.

P1786SS

–

Robe Hook

Stainless Steel Finish

Cleaning Instructions:

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 (800) 321-8809 •

FAX: (800) 848-6636 • INTERNATIONAL: (440) 962- 2000 •

FAX: (440) 962

2726 CUSTOMER SERVICE (USA): 800

882

0116

1. Remove mounting bracket from back of fixture by loosening the set

screw.

2. Position unit on wall in desired location.

3. Lightly mark the outline of the base of the unit.

4. Center mounting bracket inside the outline.

5. Mark hole locations. Attach bracket to wall using 1 3/8” screws

(provided).

6. Mount base on bracket. Tighten set screw on the bottom.

Note: Wood blocking is preferable behind all wall surfaces.

If wood blocking is not available, the following optional fasteners are

suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –

Toggle Bolts.

Stock Number:

______________________Towel Ring

By CSI Bath Furnshings

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Towel Ring

P1786

Stainless Steel Technical Specification

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

