Specification

 Y3503BN – Robe Hook
Brushed Nickel Finish
25300 AL MO E N D R I VE  NO RTH O L M S TE D, OH 4 4 0 70
CO R P O RAT E HE A D Q U A RT ER S : ( 8 00 ) 3 2 1 -88 0 9  FA X: (800) 8 4 8 - 6 6 3 6
IN T E R NAT IO N A L : (440 ) 9 6 2 - 2 0 00  F A X: ( 4 4 0 ) 962 -2726
CU S T O M ER S ER V ICE ( US A): 800 -882 - 011 6  F A X: (88 8 ) 3 7 9 - 2720
W WW . MO E N .C O M
© 2015 Moen Incorporated. Moen is a registered trademark and Hensley is a trademark
of Moen Incorporated. All rights reserved.
11
Robe Hook is constructed of zinc.
Cleaning Instructions:
Stock Number: Y3503 Robe Hook
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
Y3503
Hensley
™
Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
1) Position the mounting template on the wall in the desired location.
2) Using a level, align the template and tape it to the wall.
3) Drill two ¼” holes at each mounting post location that corresponds to
your product. (We recommend using the horizontal holes for drywall
installation).
4) Remove the template from the wall.
5) Lightly tap anchors until flush with the wall.
6) Remove mounting posts from the product assemblies by loosening
each setscrew.
7) One at a time, Place each mounting post over anchors (notch facing
downward) and insert screws through post into anchors.
8) Tighten screws.