Dimensions Guide

Home Care Technical Specication
Pause Control Handheld Shower DN8001CA
Stock Numbers:
Materials:
Dimensions:
Installation Instructions:
Cleaning Instructions:
DN8001CA – Pause Control
Handheld Shower
Glacier Finish
1. Remove the existing cradle or showerhead from the wall by unscrewing
(counter clockwise) the product from the end of the shower arm.
2. Cover the thread of the pipe coming out of the wall with thread seal tape
(included).
3. Screw the Pause Control Handheld shower cradle on to the pipe (shower
arm) coming out of the wall.
4. Identify the end of the hose with the black washer inside the plastic nut and
screw the hose onto the bottom of the cradle.
5. Screw handheld shower onto the other end of the hose.
6. Rest the handheld shower in the cradle.
To preserve the ne nish of this product, clean only with a soft damp cloth.
Dry well. Do not use commercial or abrasive cleaners.
Hand Held Shower is made of ABS Plastic
and Santoprene.
Flow Rate of 1.75 gpm (6.6 L/min.)
Stock Number: ����������������� Hand Held Shower
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2017 Moen Incorporated. All rights reserved.
ø
3.548"
(90.12mm)
11.17
"
(283.91mm)
6.475
"
(164.46mm)
ASSEMBLY TESTED
TO CONFIRM ADA
COMPLIANCE