Specification Sheet

CRITICAL DIMENSIONS
(DO NOT SCALE)
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIA
L
Installation Detail
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
1/19
Model
Number
Faucet
Holes
GS221963B 37"Rear
GS221964B 47"Rear
GS221983B
(Pictured)
3 6-1/2" Rear
GS221984B 4 6-1/2" Rear
Depth
Inches
Drain
Placement
ADA/FHA
Compliant*
FHA
FHA
ADA/FHA
ADA/FHA
Faucet Hole Configurations
1-3/8" (35mm) diameter faucet holes
4" (102mm) Center
22"
(559mm)
15-3/4"
(400mm)
21"
(533mm)
25"
(635mm)
3-5/8"
(92mm) DIA.
4-3/10"
(109mm)
6”
(152mm)
SINK DESCRIPTION
• 2200 Series single bowl drop in sink
• 22 gauge stainless steel, matte bowl finish
• U-channel mounting system
• SoundSHIELD™ sound absorbing system
WARRANTY
• Lifetime limited warranty to the original homeowner
• 10 year limited warranty when used in a Multi-family installation
• 5 year limited warranty when used in a Commercial installation
• Visit www.moen.com/customer-support/warranty for complete
details and limitations
SINK DIMENSIONS
• Overall: 25" x 22"
• Bowl: 21" x 15-3/4"
• Drain Size: 3-5/8"
CUT OUT DIMENSIONS
• 24-3/8" x 21-3/8" with 1-1/2" corner radius, tolerance of plus or
minus 1/16" is acceptable
STANDARDS
• Third party certified to meet ASME A112.19.3/CSA B45.4 and all
applicable specifications referenced therein
• *ADA/FHA Sink compliant to ADA (ICC A117.1) and FHA
accessibility specifications when installed to these required
standards. Always consult with your local building department
for the specific installation requirements.
• *FHA Sink compliant to FHA accessibility specifications when
installed to these required standards. Always consult with your
local building department for the specific installation requirements.