User manual

3
(6) TUNER
When this footswitch engages, it switches the guitar to TUNER jack and mutes the
OUTPUT jack at the same time.
(7) TUNER INDICATOR
The indicator lights up when TUNER footswitch is engaged.
(8)BANK
This footswitch changes the preset bank number by pressing once shortly.
Double press (press twice shortly) this footswitch will enter “ON THE FLY” mode.
Hold this footswitch for 2 seconds will start to edit the preset LANE.
(10)INDICATORS OF SEQUENTIAL LOOPS
Loop3, loop4, loop Green and loop Blue are internally connected, the signal path is :
guitar - N1 - loop3 - N2 - loop4 - N3 - output. The sequential loops (Green and Blue) could
be at one of the node positions N1/N2/N3, node (N1/N2/N3) indicators light up in green
when loop Green is engaged, light up in blue when loop Blue is engaged.
(9)PROGRAM BUTTONS&INDICATORS FOR LOOP3/4/5
LP3/4/5 are program buttons for loop3/4/5, the center indicator lights up when the loop
is engaged. Loop3 and loop4 are “order fixed” loops, loop5 is an isolated loop.
(11) AMP FOOTSWITCH INDICATORS
There’re two amp footswitches - FS1 and FS2, the indicator "1" / "2" lights up when
FS1/FS2 is engaged.
(12)SCREEN
The screen show preset pool/bank index, midi numbers, setup information.