Specification Sheet

Paper Holder

is constructed of zinc.

Paper Holder

Brushed Nickel Finish

DN7708CH Paper Holder

Chrome Finish

Cleaning Instructions:

Remove mounting post from product assembly by loosening the setscrew .

2. Position the mounting post on the w all at desired location w ith notch facing

dow nw ard, and mark both horizontal hole locations.

3. Drill 2 holes as marked

4. Fold ends of the plastic toggle anchor together (see Figure 1) and insert into

each hole in the w all.

5. Lightly tap anchors until flush w ith the w all.

6. One at a time, insert plastic pin into each anchor and lightly tap to activate

anchor (see Figure 2). Remove pin and repeat on other anchor.

7. Place mounting post over anchors w ith notch facing dow nw ard, and insert

screw s through post into anchors.

8. Tighten screw s.

9. Place assembly over the mounting post w ith setscrew facing dow n and tighten

setscrew .

Stock Number:

______________________

Paper Holder

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Paper Holder DN7708

Lounge

To preserve the fine

finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

25300 A L

MO EN D R I V E

N O R TH O LMSTE D , O H 440 70

C O R PO R A TE H E AD QU A R TER S : (80 0) 3 21 - 88 09 F A X: ( 80 0) 8 4 8-6 63 6

I N TER N ATI O N AL : (4 40) 9 62 -20 00 F AX: (4 40) 9 6 2 -2 72 6

C U S TOMER SE R VI C E (U S A) : 800 -88 2- 01 16 F A X: ( 88 8) 3 79 - 27 20

W W W . MO EN . C O M