Specification

Technical Specication
Tub and Shower Chair DN7140
Stock Numbers: Dimensions:
DN7140 – Tub and Shower Chair
Adjustable seat height from 17" to 21"
Materials:
Seat and back rest are made from
high density polyethylene.
Feet are made from thermal plastic
elastomer.
Stock Number: ____________ Tub and Shower Chair
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CONSUMER SUPPORT: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2018 Moen Incorporated.
17.5”
18.85”
18.65”
WARNING:
TO PREVENT SERIOUS OR FATAL
INJURY: Ensure product is assembled,
adjusted and used properly. FOR USE
ONLY BY PERSONS WEIGHING LESS
THAN 250 LBS. Failure to follow correct
installation procedures can cause the legs
to become loose. Check after installation
to make sure legs are secure, and check
periodically to be sure legs remains secure.
Contact Moen immediately at 1-800-882-
0116 if any components are missing or
damaged. Do not modify or substitute
any components. FOR QUESTIONS
OR ASSISTANCE WITH ASSEMBLY
CONTACT MOEN AT 1-800-882-0116.
Consult a healthcare professional for
advice and instructions specic to
user's needs before use.