Technical Specifications

Bath Mat

is made from translucent

polyvinyl chloride with a pebbled top

surface and a waterproof adhesive

backing.

DN7050

–

Bath Mat

Translucent

Adhesive Backing

Photo Box Packaging

25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 (800) 321-8809 •

FAX: (800) 848-6636 • INTERNATIONAL: (440) 962- 2000 •

FAX: (440) 962

2726 CUSTOMER SERVICE (USA): 800

882

0116

Prepare floor. Before beginning, make sure the tub or shower floor

is completely clean and dry.

2. Prepare mat. Peel away three inches of the paper backing along

the edge of the mat that will be located closest to the drain.

CAUTION: Do not touch the adhesive backing under the paper.

3. Position mat. Position the mat, paper side down, exactly where

you want it.

4. Secure mat. Gently press down the exposed section of the

adhesive against the floor surface. Then, reach under the mat and

slowly remove the remaining paper, stopping periodically to gently

press down the new exposed section of the mat. The mat will

adhere immediately. No drying is needed.

Stock Number:

________________________Bath Mat

By CSI Bath Furnishings

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Bath Mat

DN7050

Home Care Technical Specification

