Installation Guide

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006
Glass Shelf
posts are constructed of
zinc. Shelf is tempered glass.
q
D
N4190BN
–
Glass Shelf
Brushed Nickel Finish
Cleaning Instructions:
1.
Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Place each mounting plate on the template.
3. One at a time, place each anchor screw through the mounting plate, centered
in the large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.
4. Only insert screw ½ to ¾ into wall.
5. After all screws are installed, tear the template away from the wall
6. Tighten all 4 the screws. Do not over tighten.
7. Assemble glass to each post by unscrewing the top accent. Re-
assemble with
glass shelf between both washers and finish by screwing top accent back on.
8. Place each post over the mounting plate with setscrew down. Tighten both
setscrews.
Stock Number:
________________________Glass Shelf
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
DN4190
Stockton Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1156