Specification Sheet

Robe Hook
is constructed of zinc.
q
DN4103CH
–
Robe Hook
Chrome Finish
q DN4103BN – Robe Hook
Brushed Nickel Finish
q DN4103AN – Robe Hook
Antique Nickel Finish
Cleaning Instructions:
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: (440) 962- 2000 •
F
AX: (440) 962
-
2726 CUSTOMER SERVICE (USA): 800
-
882
-
0116
1.
Position the mounting plate on the wall at desired location. Large slots to be
top and bottom. Small holes to be right and left.
2. One at a time, place each anchor screw through the mounting post, centered
in the large slot hole. Using a Phillips screwdriver, turn the anchor screw
while applying pressure. Screw will self drill and tap into drywall. Do not
over tighten.
3. Place assembly over the mounting post, setscrew facing down.
4. Tighten setscrew.
Stock Number:
______________________Robe Hook
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Robe Hook
DN4103
Stockton Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1151