Specification Sheet

Iso™ Technical Specication
Round Mirror DN0792
Stock Numbers: Dimensions:
Installation Instructions:
Cleaning Instructions:
DN0792CH – Round Mirror
Chrome Finish
DN0792BN – Round Mirror
Brushed Nickel Finish
Directions below are for installation into drywall. If installing product into a stud, use the
wood screws and washers provided only.
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 5/16" holes as indicated on template.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole in the wall.
6. Lightlytapanchorsuntilushwiththewall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to activate
anchor. Remove pin and repeat on all anchors.
8. Mount mirror brackets to wall by inserting screws through the holes in the brackets into
the anchors.
9. Place mirror into the bottom bracket and rotate into place behind the top bracket.
Topreservethenenishofthisproduct,cleanonlywithasoftdampcloth.
Dry well. Do not use commercial or abrasive cleaners.
Materials:
Round Mirror brackets are constructed of
zinc and mirror is constructed of glass.
Stock Number: _____________________ Oval Mirror
By Moen Incorporated
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: [phone] • FAX: [phone]
INTERNATIONAL: (440 ) 962-2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.MOEN.COM
©
2018 Moen Incorporated.
2"
(51mm)
24"
(610mm)
26"
(660mm)