Specification Sheet

Paper Holder
is constructed of zinc.
q
YB98
0
8
CH
–
Paper Holder
Chrome Finish
q YB9808BN – Paper Holder
Brushed Nickel Finish
q YB9808WR – Paper Holder
Wrought Iron Finish
Cleaning Instructions:
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800- 882-0116 • FAX: [phone]

Copyright Creative Specialties International 2004 Literature #BA1186
1.
Position the mounting te
mplate on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Remove each mounting post from the body by loosening the setscrew.
3. Place each mounting post on the template with notch facing down.
4. One at a time, place each anchor screw through the mounting post, centered
in the hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall.
5. Only insert screw ½ to ¾ into wall.
6. After all screws are installed, tear the template away from the wall.
7. Tighten all 4 screws. Do not over tighten.
8. Place skirt over each mounting post.
9. Place each post over the mounting plate (setscrew down). Pivoting post
with bar to be on left side. Tighten both setscrews.
Stock Number:
______________________
Paper Holder
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Paper Holder
YB9808
Waterhill™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.