Specification Sheet

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070

C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: (800) 848-6636

I N TER N ATI ON AL: (440) 962-2000  FAX: (440) 962-2726

C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: (888) 379-2720

W W W . MOEN . C OM

Copyright Creative Specialties International Literature #BA1629

Shower Rods are 20-gauge stainless

steel with a polished finish.

See Technical Specification for 58-F for

information on the adjustable flanges.

 58-5 – 5’ Stainless Steel Shower Rod

Set

Polished Finish

1” Diameter Smooth Rod

Exposed Screw Mounting

Flanges (58-F)

1. Place flanges on both ends of shower rod.

2. Position rod assembly in desired location.

3. Mark location of mounting holes for both flanges.

4. Drill starter holes.

5. Attach left bracket to wall using 2” screws (provided).

6. Insert rod and right bracket assembly into left bracket.

7. Slide right bracket against wall and attach with 2” screws

(provided).

Note: Wood blocking is preferable behind all wall surfaces.

If wood blocking is not available, the following optional fasteners are

suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –

Toggle Bolts

Stock Number:______________________Shower Rod

By Creative Specialties

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Shower Rod Sets – Exposed Screw

Shower Rods Technical Specification

PAGE 1
Shower Rods Technical Specification Shower Rod Sets – Exposed Screw Dimensions: Stock Numbers:  58 58-5 – 5’ Stainless Steel Shower Rod Set Polished Finish 1” Diameter Smooth Rod Exposed Screw Mounting Flanges (58-F) Installation Instructions: Materials: Shower Rods are 20-gauge stainless steel with a polished finish. See Technical Specification for 58-F for information on the adjustable flanges. 1. 2. 3. 4. 5. 6. 7. Place flanges on both ends of shower rod. Position rod assembly in desired location.