Specifications

Glass Shelf posts are constructed of
zinc. Shelf is tempered glass.
DN8390BN Glass Shelf
Brushed Nickel Finish
DN8390CH Glass Shelf
Chrome Finish
Cleaning Instructions:
1. Position the mounting template on the w all in the desired location.
2. Using a level, align the template and tape it to the w all.
3. Drill tw o 5/16” holes at each mounting post location that corresponds to your
product. (We recommend using the horizontal holes for dryw all installation).
4. Remove the template from the w all.
5. Fold ends of the plastic toggle together (see Figure 1) and insert into each hole
in the w all.
6. Lightly tap anchors until flush w ith the w all.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor (see Figure 2). Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew .
9. One at a time, place each mounting post over anchors (notch facing dow nw ard)
and insert screw s through post into anchors.
10. Tighten screw s.
11. Remove the accent cap from both assemblies by loosening the setscrew s.
Reassemble each end w ith glass shelf betw een both w ashers and the accent
cap at the top. Tighten the setscrew s.
12. Place assembly over the mounting posts w ith setscrew s facing dow n. Tighten
both setscrews.
Stock Number:______________________Glass Shelf
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
DN8390
RetreaTechnical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN D R I VE N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809 F AX: (800) 848-6636
I N TERN ATI ON AL: (440) 962-2000 F AX: (440) 962 -2726
C U STOMER SER VI C E (U SA): 800 -882-0116 F AX: (888) 379-2720
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1329

Summary of content (1 pages)