Specification

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
SPACER
PROVIDED –
DISCARD IF
MOUNTING
SURFACE IS
MORE THAN
3/4" THICK
1-3/4"
(45mm)
MAX.
2"
(51mm)
2"
(51mm)
1/2" IPS
ADAPTER
DECK PLATE
TOP OF
MOUNTING
SURFACE
6-1/8" (156mm)
ESCUTCHEON WIDTH
2"
(51mm)
Lift
Rod
2"
(51mm)
ESC.
WIDTH
4-3/8"
(111mm)
5-5/8" (143mm)
4"
(101mm)
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Pivot action lever style handle
• Temperature controlled through 100˚ degree arc of handle travel
FLOW
• Aerator is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense®, CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3-1" DIA. HOLES, 2" ON CENTER
Single-Handle Lavatory Faucet
with Plastic Waste Assembly
Model: CAL84502
L
ess Waste
Model: CAL84500
Rev. 10/10
There is more than 1 version of this model.
Page down to identify the version you have.