Specification

10-3/8”
(265mm)
6-3/8”
(162mm)
3-7/8”
(99mm)
2-3/8”
(61mm)
12-7/8”
(326mm)
9”
(229mm)
15/16” (24mm)
MAX. DECK
THICKNESS
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
Banbury®
Two Handle Lever Kitchen Faucet
with Protégé® Side Spray
Models: CA87553 series
NOTE: DESIGNED TO INSTALL THROUGH 3 HOLES
1-1/4” (32mm) MIN. DIA. AND 8” ON CENTER
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Inlet shanks will accept 3/8” ball nose connections
• With Protégé® side spray
OPERATION
• Lever style handle
• Will operate with less than 5 lbs. of force
FLOW
• Tap water: 2.0 gpm max (7.6 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1and all applicable
requirements referenced therein including NSF 61/9
• Meets Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 2/12