Specification

FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8" compression fittings
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
FLOW
• Tap water: 2.0 gpm max (7.6 L/min)
CARTRIDGE
• 1255® Duralast® cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein including NSF 61/9
• Meets Georgia SB370 requirements
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
BANBURY®
Single Handle Lever Kitchen Faucet
with Protégé® Side Spray
Models: CA87528 series
CA87527 series (spray in deck)
9”
(229mm)
3-3/4”
(96mm)
6-5/16”
(mm)
7-1/2”
(190mm)
7/8" (22mm)
MAX. DECK
THICKNESS
FOR SIDE
SPRAY
4-3/4"
(121mm)
2" (52mm)
32"
(813mm)
1-5/8" (41mm)
MAX. DECK
THICKNESS
Rev. 12/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
NOTE: DESIGNED TO BE INSTALLED THROUGH 3 HOLES
1-1/4" (32mm) MIN. DIA. AND 4" (102mm) ON CENTER.
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
There is more than 1 version of this model.
Page down to identify the version you have.