Specification Sheet

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Single Control Kitchen Faucet
Models: CA87316 series
28-1/2”
(724mm)
9-3/8”
(238mm)
5-9/16”
(141mm)
2” (51mm)
Max. Deck
Thickness
7-5/8”
(194mm)
9-5/8”
(241mm)
Rev. 4/09
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/4” (32mm) MIN. DIA.
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock™ quick connect installation
• Pullout spray with 68" braided hose
• 1/2" IPS connections will accept standard ball nose connection for 3/8" tubing
OPERATION
• Lever style handle
• Temperature controlled by 120˚ arc of handle travel
• Spout rotation is 120˚
• Operates with less than 5lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Aerator is limited to 2.2 gpm (8.3 L/min) max.
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, nonferrous and stainless steel materials
STANDARDS
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• Third party certified to meet CSA B125.1, ASME A112.18.1 and all applicable
requirements referenced therein including NSF61/9
•
ADA for lever handle
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations